Hydraulic Torque Wrench System
Type: CR |
Series: CR Hydraulic Torque Wrenches
Fully aware of the difficulties associated with flange bolting, two
distinct types of hydraulic torque wrenches are available in the series.
CR models have a square drive, to enable easy fitment of impact sockets and ancillaries, making them highly adaptable for tightening and un-tightening bolts of all sizes.
|
|
In contrast, CCR models have an open hexagon and are designed to fit directly onto the nut or bolt head. This tooling is ideal for use on applications with limited overhead access or with fasteners with excessive thread protrusion.
Typical Application
Suitable for all applications with restricted radial or overhead clearances.
• Studded and Bolted flanges
• Slew Rings
• Wind Turbines
• Mast and crane support
• Blow out preventors
• Subsea valves
• Holding down bolts
|
Features...
• Strong and Compact design
• Reversible Operation
• Accurate to +/- 3% of setting
• 12 Position Reaction
• Special Reactions on request
• Rapid double action operation
• Corrosion resistant
• Full steel construction
• Swivel couplings on request
• Suitable subsea and underground, onforming to current european standards
Techncial Specification
| Model |
Dimensions (mm) |
Weight |
Maximum Torque |
Square Drive |
A |
B |
C |
D |
E |
R |
Kg |
lbf.ft |
Nm |
|
| CR1 |
42 |
115 |
28 |
65 |
70 |
24 |
4 |
1000 |
1360 |
3/4 |
| CR 1.5 |
50 |
140 |
30 |
65 |
90 |
25 |
6 |
1500 |
2040 |
1 |
| CR 3 |
52 |
175 |
40 |
90 |
92 |
35 |
8 |
3300 |
4488 |
1 |
| CR 5 |
65 |
180 |
45 |
95 |
120 |
37 |
13 |
5800 |
7888 |
1 1/2 |
| CR 7 |
65 |
207 |
58 |
112 |
120 |
45 |
16 |
7400 |
10060 |
1 1/2 |
| CR 11 |
83 |
222 |
66 |
130 |
138 |
45 |
22 |
11000 |
14960 |
1 1/2 |
| CR 15 |
95 |
230 |
70 |
140 |
172 |
52 |
31 |
15000 |
20040 |
2 1/2 |
| CR 20 |
97 |
265 |
74 |
157 |
175 |
62 |
44 |
21000 |
28560 |
2 1/2 |
| CR 30 |
115 |
290 |
80 |
175 |
185 |
69 |
54 |
32000 |
43520 |
2 1/2 |
| CR 50 |
145 |
320 |
90 |
200 |
230 |
85 |
103 |
50000 |
68000 |
3 1/2 |
| CR 80 |
172 |
416 |
100 |
258 |
272 |
100 |
178 |
80000 |
108800 |
3 1/2 |
Notes.
Tentec Mult-Stud Tensioning Systems are built and designed on
request. Contact Tentec with application details for a no obligation
design and quote.
You will find more in formation about this product in the downloads section (right)
Visit the CCR Series page
|
|
